Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

Shimano Ultegra Brake Calipers
$100.00 - $200.00
Shimano's Ultegra Brake Calipers feature lightweight, stiff, cold-forged aluminum arms and a symmetrical dual-pivot design with twin bearings for smooth, easy operation with modulation and power to spare. Pair them with Shimano's Ultegra polymer-coated brake cable and scrubbing speed feels almost effortless. Setup is fast and simple with cartridge brake pads equipped with conical washers.
SRAM Guide RE Disc Brake
$179.99
Guide RE is SRAM's optimized braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. The Guide RE provides real, usable on-trail control—optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. - Guide R lever assembly with proven Guide technologies - Powerful 4 piston caliper derived from the Code gravity specific brakes - Sintered pads for better pad life in intensive use - MatchMaker X compatible - Ambidextrous lever mount - Tool-free reach adjust - Weight: 415 grams (based on direct mount, 800 hose, 160mm CL Rotor) - Lever Material: Aluminum - Caliper Design: 4 piston caliper derived from the Code gravity specific brakes - Finish: Gloss black - Pad: Steel-backed metal sintered - Fluid: DOT 5.1 - Mount: Ambidextrous - Adjustment: Tool-free Reach Adjust, Banjo Adjust - Pivot: Bushing
SRAM Level T Disc Brake
$107.00
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.
Shimano Ultegra RT800 Centerlock IceTech Disc Brake Rotor
$80.99 - $89.99
Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece
SRAM Centerline CenterLock Rotor
$79.99
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
SRAM Centerline Rotor
$79.99
SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.
SRAM CenterLine Rotor with Rounded Edge
$59.99 - $69.99
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
TRP Spyke Lever
$59.99
The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair
Avid Hydraulic Line Kit
$42.00 - $55.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Shimano SLX Disc Brake Rotor
$44.99
Shimano's SLX disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system and it rides on a light, yet rigid Centerlock spider. The finned shape of the rotor provides continuous heat regulation to keep braking power consistent and improve pad life.
Shimano D02S Metal Disc Brake Pad
$39.99
Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
SRAM Trail/Guide Disc Brake Pads
$37.00 - $37.99
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
Hayes Disc Brake Pads
$24.00 - $35.99
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Shimano Sora BL-R3000 Brake Lever
$35.99
Shimano Sora BL-R3000 Road Brake Levers - Design to seamlessly function with SL-R3000 - Brake lever is compatible with a wide variety of brake calipers - Not compatible with linear-pull brakes - Brake Lever Actuation: Short Pull
Avid Disc Brake Pads (Code)
$31.19 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
SRAM Road Disc Organic Brake Pads
$32.99
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
SRAM Master Cylinder/Lever Parts
$31.99
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Avid FR-5 Brake Levers
$30.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$30.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Kool-Stop Steel Disc Pads (Avid)
$29.99
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (SRAM)
$29.99
• High performance compounds recommended for all-conditions • Steel backing
Shimano Deore XT M755 A01S Resin Disc Brake Pad and Spring
$29.99
Shimano A01S Resin Disc Brake Pads - Fits XTR BR-M975/966/965, Saint BR-M800, XT BR-M776/775/765, SLX BR-M665/601, Deore BR-M596/595/585/545/535, Road BR-R505, Alfine BR-S501/500, LX BR-T665/605 calipers - OEM resin pad for XT BR-M775 and SLX BR-M665 calipers - Resin pad with low noise and excellent power modulation - Backing Plate Material: Steel - Compound: Resin - Heat Sink: No - Pad Shape Number: 20
Hayes Caliper Adapter
$25.99 - $28.00
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
Jagwire Road Pro Brake Pads
$27.99
Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.
Kool-Stop Steel Disc Pads (Formula)
$27.99
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Hayes)
$27.99
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Magura)
$27.99
- High performance compounds recommended for all conditions - Steel backing
Kool-Stop Steel Disc Pads (Shimano)
$27.99
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Tektro)
$27.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel
Jagwire Mountain Sport Semi-Metallic Disc Brake Pads (SRAM)
$22.99 - $24.99
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate
Page 1 of 2 Next page