Skip to main content

Filter By:

Fresh Inventory

$49.50 - $59.50
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite
$59.00
If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage. FEATURES - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) SPECS - Weight: 68g 32-34T - Capacity: 28-36T - Chainline: 2.5mm adjustment - Mount: ISCG05 2-Bolt ONLY - Color: Black - Material: 7075 aluminum, glass reinforced thermoplastic
$33.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
$189.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.
$26.00
V2 dropper remote clamp for 22.2mm handlebar.
$239.99 - $299.50 $259.50 - $299.50 Up to 20% Off
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$55.00
OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required, saves you $15. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC - Material: 7075-T6 - Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) - Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed Shimano/Hyperglide Chains) - Colors: Black, Green - Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
$73.00
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
$53.00
The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube
$21.00
HEIGHT ADJUSTMENT WASHERS AND PINS FOR OUR ALUMINUM PEDALS KIT CONTAINS - 40 - HEXIGONAL TIPPED M4 THREADED SOCKET HEAD PINS - 40 - 0.8mm THICK HEIGHT ADJUSTMENT WASHERS
$25.00
This kit includes all the parts required to rebuild your V1 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V1 Dropper Post ONLY. We have found that ~95% of posts with slow top out were caused by low air pressure. Please make sure to check this first and do so with the post fully extended. Proper air pressure is 280-300psi at full extension, and the valve is located under the top clamp. If you are still having slow top out then there is a possibility that the upper white bushing needs replacement. This will be evident by the original bushing being difficult to reinstall after being removed.
$31.50
Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS
$109.50
Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
$99.99
Joining our Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. SPECS - Length: 35mm (155g) 50mm (173g) / 35mm Dia. / 0° Rise - Colour: Black. - Stack Height: 39mm - Bar Clamp Width: 55mm - Material: 6061-T6 Aluminum
$35.99
A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm
$3.50 - $7.00
- Color kits for OneUp riser bars plus some extra stickers for whatever you choose
$195.99
ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.
$21.99
CO2 inflator with 2 cartridge set Details - 2 Threaded 20g CO2 cartridge and Klic CO2 head/cartridge adapter (presta only) - Inflator compatible with threaded 12g, 16g, 20g, and 25g cartridges. Specs - Warranty: 5 years - Weight (Inflator): 45g
$55.00
- Narrow-wide teeth prevent unwanted chain drop - Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms - Perfect 49mm chainline with 2mm shims included for a quieter drivetrain improved chainring wear and best no drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced wide tooth design provides maximum ring durability when run without a bash guard. - Made from hard wearing 7075-T6 aluminum plate. *Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware. SPEC - Material: 7075-T6 Aluminum - Weight: 43g (30T), 49g (32T), 58g (34T) - Chainline: 49mm Compatible with: - 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains - All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612) SRAM chainrings usually have the BCD laser etched on the back of the ring If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face. NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - Shimano Deore M5100-1 Cranks
$78.00
All your trailside tools, always on your bike and instantly accessible The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical. NEW FOR 2020 - Easier to remove from your bike, with a lower friction design. - Updated Chain Breaker is easier to use and has a steel body for increased durability - Stronger steel Spoke Keys - Black Multi-Tool - Tubeless plug jabber cover (Small storage capsule) - TOOL FEATURES (20 functions, 130g) - Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker. MULTI TOOL FEATURES (10 functions, 58g) - 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool - The EDC Tool contains no loose, easy to lose driver bits - Ultra compact and super lightweight. TIRE LEVER/CHAIN BREAKER FEATURES - Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt CARRIER FEATURES - Spare Quick Link Storage - 12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules STORAGE CAPSULE - The V2 EDC tool now comes with a small and a large sealed storage capsule. The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items. Storage Capsule Suggested Pack List (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches. EDC TOOL STORAGE OPTIONS - The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle. COMPATIBILITY - Backwards compatible with all V1 EDC Tool storage options.
$180.00 $230.00 22% Off
The Crankbrothers Mallet clip-in shoe plays nice on the race track and at the bike park. Our innovative Match System optimizes engagement for any MTB clip-in system, whether that’s Crankbrothers or SPD. It comes with Match shim and Crankbrothers cleat pre-installed in a neutral position so they are ready to ride with Crankbrothers pedals right out of the box. - Closure System: Speed Lace closure system offers fast adjustment, a strap for secure closure and a pocket to safely tuck laces. - Match Box: The ramped cleat box offers easy front and rear pedal entry and mud shedding. A Race Zone setback on the cleat track allows the cleat to be positioned further toward the heel for added control and stability when descending. - Match Compound: Our mid-friction rubber compound (MC1) allows for easy pedal entry and exit and is hard enough to hold up to wear and tear. The radial lug pattern around the cleat box is designed to provide smooth release from the pedal body. - Match Outsole: The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain. Upper Features: - Closure system - Hidden eyelets - Lace pocket - Perforated toe - Mesh windows - Perforated tongue - Reinforced toe - Padded tongue - Heel dots
$90.00 $180.00 50% Off
The Stamp flat shoe does it all, whether on street or trail. The outsole is optimized for Crankbrothers Stamp pedal body, though it is designed to work flawlessly with any flat pedal. Its high-friction rubber compound provides optimal grip and its lug depth absorbs the pins to ensure a secure pedal connection. - Closure System: Classic lace closure system offers smooth closure with round laces and a pocket to safely tuck laces. - Match Compound: Our flat rubber compound (MC2) is optimized for grip and durability. It has high-friction to stick to the pedal body and low rebound properties to dampen vibrations. The lugs are rounded to resist abrasion. - Match Outsole: The tread pattern is designed for traction off the bike. Directionally angled and spaced toe and heel lugs offer traction for hiking up or down steep terrain. The ramped toe provides walkability on steep terrain. - Match System: The tread pattern is designed for maximum contact surface and compatibility with the pedal platform. In addition, the lug depth is designed around pin dimensions to absorb the pin body. Upper Features: - Closure system - Hidden eyelets - Lace pocket - Perforated toe - Mesh windows - Perforated tongue - Reinforced toe - Padded tongue - Heel dots
$53.00
- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)
$55.00
OneUp your SRAM 94mm or Shimano 96mm BCD crank with our tried and tested narrow wide profile. - 12% ovality offers greater traction 115 degree clocking maximizes power stroke - Narrow-wide teeth prevent unwanted chain drop - Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms - Perfect 49mm chainline - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced wide tooth design provides maximum ring durability when run without a bash guard. - Made from hard wearing 7075-T6 aluminum plate. *Shims - Included with rings. For 2x crank conversions; shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions; shims under the bolt heads allow reuse of your 3x hardware. SPEC - Material: 7075-T6 Aluminum - Weight: 42g (30T), 50g (32T) - Chainline: 49mm Compatible with: - 9, 10, 11 Speed SRAM & Shimano, and 12 Speed SRAM Chains - All symmetrical 4 arm 94 mm BCD cranks (SRAM XO1, X1, GX), all symmetrical 4 arm 96 mm BCD cranks (Shimano compact triple M782, M672, M622, M612) SRAM chainrings usually have the BCD laser etched on the back of the ring. If your Shimano 3x crank has a 30T middle ring this is the 1x ring you need. Shimano crank part numbers are usually laser etched on the pedal end of the crank on the back face. NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - Shimano Deore M5100-1 Cranks Colors: Black Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm
$39.50
When top EWS Pro Riders ask you to develop a stiffer more durable fork axle, you listen. The stock 15mm axles and other lightweight aftermarket options were simply not tough enough for their race bikes. We don't quite ride at the pace of an EWS Pro, but we loved the simplicity and clean look of the axle so we made them available to buy. Axle F is 98% stronger and stiffer than a stock 15mm axle, yet still 20g lighter than a QR. We've replaced the QR lever with a simple 6mm hex. If you already carry the EDC multitool with you, there's no need for the heavy and bulky QR lever. FEATURES - 98% Stiffer and stronger than stock 15mm QR thru axle - 20g Lighter than stock QR thru axle - Low profile hex head won't get caught on trailside obstacles. COMPATIBILITY - For Fox and RockShox 15mm axle forks (Boost and Non Boost) - NOT compatible with RockShox RS-1 fork or Fox 36 Pinch Bolt Style (2016 and older) - NOT compatible with floating thru axles from 2021 Fox 36, 38 or 40 WEIGHT - RockShox Boost (15x110) 63g - RockShox Non Boost (15x100) 59g - Fox Boost (15x110) 61g - Fox Non Boost (15x100) 58g MATERIAL - 6061-T6 Aluminum
$59.00
GET A NO COMPROMISE NARROW-WIDE CHAINRING WITH PERFECT CHAINLINE AND SAVE MORE THAN 35G OVER A STOCK SHIMANO RING Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit. - Saves over 35g versus stock ring (32T) - Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. - Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from 6mm hard wearing 7075-T6 aluminum plate SPEC - Material: 7075-T6 - Chainline: 49mm - Weight: 45g (30T), 51g (32T), 60g (34T) Compatible with: - 9, 10, 11 and 12 Speed SRAM Chains. - 11 speed Shimano XT M8000 1X and 2X armsets - 11 speed Shimano SLX M7000 1X armsets - 11 speed Shimano MT700 2X armsets - 12 speed Shimano MT510 1X armsets NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - 10 speed Shimano XT armsets Colors: Black
Page 1 of 1