CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging, or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
CycleOps' 20-/24-inch Wheel Adapter allows you to attach your BMX or recumbent bike to your trainer (sold separately). The adapter raises the resistance unit up for smaller wheels. It's compatible with CycleOps' Wind, Mag, Mag+, Magneto, and Fluid² trainers.
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
-Everything you need for the best indoor trainer experience possible. -Includes Trainer Mat, 2 Climbing Blocks, Sweat Guard & Trainer Tire.
With CycleOps' Rollers Fork Stand anyone can ride rollers! Just attach this little beauty to your rollers, clamp your fork in place, get on and ride. It's that simple. The Fork Stand mounts directly to the frame of your rollers for excellent strength and stability. No balancing is necessary, so you can watch television or read while riding your rollers!
Train Free, Train Perfect with the Wahoo Tickr X. This ultimate workout wearable is the latest addition to the Tickr family, and it tracks workouts with and without your phone. The Tickr X's memory feature captures heart rate and calorie burn even if your phone isn't connected - perfect for those days where you forget your phone or want to leave it in your gym bag. It also tracks additional motion analytics such as cycling cadence. It's the perfect fitness tracker for all types of athletes!
In the Tech Mag 1, Blackburn delivers a high quality trainer that lives up to the production and quality standards of the brand, yet is simple, easy to use and affordable. - Single resistance setting for no-fuss operation - Compact, lightweight and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - 6713g / 14.80lb Dimensions: -Length 550/550mm/21.7/21.7in -Width 550/480mm/21.7/18.9 -Height 415/160mm/16.3/6.3in
The Blue Twist is streamlined and simple, featuring the performance Tacx's Blue trainers are known for, but without a handlebar resistance lever. You manually set the resistance, selecting one of the seven positions using a switch on the brake. The maximum resistance is 700 Watt. The Blue Twist is suitable as an entrance model. Software: PC/laptop - Operation: Switch on brake Resistance: unit Magnetic Braking positions: 7 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheel diameter: 26"- 29" and 700c; 29" with trainer tyre
CycleOps' Wind Trainer provides all the cardiovascular exercise you can handle. Heavy die-cast zinc fan blades double as a flywheel for smooth, progressive resistance. The faster you pedal, the harder your workout... just like riding your bike on the open road.
The Blue Matic is the intermediate model of Tacx's Blue cycletrainers. Its maximum resistance is 700 Watt. The Blue Matic has a magnetic brake with permanent-magnets. You set the resistance selecting one of the ten different positions via the handlebar resistance lever. During your training session the resistance increases as you cycle faster or switch to a heavier setting. The robust frame stands firmly on the ground and it is very user friendly because the trainer can be assembled in no time at all. Software: PC/laptop - Operation: Handlebar resistance lever Resistance: unit Magnetic Braking positions: 10 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter: 26"- 29" and 700c; 29" with trainer tyre
With Blackburn's Mag 5 Trainer, you can mix up your workout with five resistance settings that you select on the fly with a handlebar-mounted remote. - Five position handlebar remote that is simple to attach and easy to use - Fastcrank mounting system allows for simple and quick installation - Compact, lightweight, and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - Five resistance settings across a broad range of levels Dimensions: - Length 550/550mm/21.7in - Width 550/480mm/21.7/18.9in - Height 415/160mm/16.3/6.3in - Weight 8210 g / 18.10 lb
CycleOps' Mag+ Trainer with Adjuster uses magnetic fields to generate a wide range of adjustable resistance, great for cyclists determined to stay in shape year round. Its unique design incorporates a flywheel for a smooth, quiet ride. Choose from 5 resistance settings for varied workouts. Plus, the bar-mounted remote shifter means you never break your cadence.
The Blue Motion uses the powerful resistance unit in Tacx's family of Blue trainers, a Neodymium magnetic unit. It allows you to achieve high power outputs even at a low pedalling frequency; the maximum resistance is 950 Watt. By using the handlebar lever you can choose one of ten different resistance positions. The Blue Motion has a simple assembly system so that the trainer can be quickly and easily put together. Software: PC/laptop - Operation: Handlebar resistance lever Resistance: unit Magnetic Braking: positions 10 Descent: simulation - Max brake power: (10 sec.) 950 Watt Sprint power: (1 min.) 800 Watt Mass inertia: 16,93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter: 26"- 29" and 700c; 29" with trainer tyre
Fine Tune Your Training Just Your Speed Up your fitness a with premium trainer that works just as hard as you do. With nine levels of resistance, controlled by a handlebar remote, you can fine-tune your workout just the way you want. - No assembly required. - Bike installation is simple and works with many wheels sizes from 26" X 1" to 29" X 2.3". - Nine resistance settings across a broad range of levels - QR skewer included to minimize damage or scratching of original QR
• LiveRide trainers work with or without LiveTraining app for smartphones • LiveTraining offers an infinite number of real-world road courses, telling the rider when to manually adjust trainer resistance for grade change simulation. Watt-based interval training mode monitors your real-time power, heart rate and cadence through easy-to-read graphs. The free mode displays only speed, cadence, and heart rate. Wahoo Fitness Key, ANT+ enabled speed/cadence sensor and ANT+ heart-rate sensor sold separately • Other LiveRide smart phone apps: LiveLocation app offers competition with other LiveRide trainer users on real courses anywhere in the world; Cogmonster app offers virtual 3D simulated courses and velodromes, plus virtual training partners • 2.7kg Neodymium magnet provides super-realistic pedaling feel and quiet operation • 13 resistance level handlebar "shifter" remote • Steel H-leg frame is rated to 265 lbs • Quick release hub clamp for fast mounting • Accepts up to 700x40c, for use with smooth tires only
CycleOps' Magneto is an innovative training tool to keep you fit, trim, and ready to ride no matter what the weather is like outside. It offers progressive resistance, which means the faster you go, the quicker the resistance ramps up, just like the real world. There is no adjustment necessary, and the resistance level automatically changes to give you a smooth, quiet ride. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
The Kinetic Magnetic trainer is the perfect choice for bicycles with lower gearing, like cyclocross bikes, fixies, singlespeeds, mountain bikes and even BMX bikes. Its super-smooth magnetic resistance unit features a heavy 6.25-pound flywheel simulating outdoor riding, so that you experience the same feeling and workout you get outside. And, with its handlebar-mounted thumb lever, you can choose from nine levels of resistance for everything from easy spins to hard efforts to full-on intervals and sprints. Other great features include the super-stable oversize steel frame that folds for easy portability and storage; a secure, easy-to-use quick-release bike mount so you can go from trainer to outdoors in a blink; a 2 1/8-inch-wide roller that minimizes tire wear; and the ability to use bikes with both quick-release and bolt-on rear wheels.
Page 1 of 2 Next page